Disconnect Box Pull Out Switch with UL,CSA Approval Fused
30A 120V PCDS-60A
Applications:
Air conditioners
Heat pumps
Water heaters
Other locations where a local disconnect is required
Specifications:
Optional:
Features:
30A 120V PCDS-60A
Applications:
Air conditioners
Heat pumps
Water heaters
Other locations where a local disconnect is required
Specifications:
Fused Pullouts | |||
Max. Hp Rating | |||
Main Ampere Rating | 120V | 240V | Wire Size Range Cu/Al 60C or 75C |
Galvanized Steel | |||
30* | 2 | 3 | #14-3 |
60* | 3 | 10 | #14-3 |
Non-Metallic | |||
30 | 2 | 3 | #14-2 |
60 | 3 | 10 | #14-2 |
Non Fused Pullouts | |||
Max. Hp Rating | |||
Main Ampere Rating | 120V | 240V | Wire Size Range Cu/Al 60C or 75C |
Galvanized Steel | |||
60 | - | 10 | #14-3 |
Non-Metallic/Polycarbonate Enclosure | |||
60 | - | 10 | #14-2 |
3 Standard Designs | ||
Non-Fused | Fused | Molded Case Switch |
Enclosure | ||
NEMA 3R (outdoor) | Metallic (galvanized/painted) | Non-metallic (plastic) |
Ratings | ||
Single-phase, two-wire, 240Vac | Three-phase, three-wire, 240Vac | 30 and 60 amps |
ACDs Fits | ||
Ground Fault Receptacles | Weather-Resistant/Tamper-Resistant Receptacles |
Features:
Fused & Non-Fused Pullouts
1.ON/OFF control provided by a pullout handle
2.Pullout handle can be conve-niently stored in the compart-ment in the OFF position,helping to 3.prevent the handle from being misplaced
4.Protective shield cannot beremoved until the pullout handle is removed,disconnecting the power.
5.UL Listed
6.Can be used as a service entrance disconnect
7.meeting the NECT 210.63 ground fault requirements
Workshop:
Certificates:
Contact Us:
Ms.Betty Hu |
M:+86 18267833685 |
24 hours online. Please feel free to contact me. |